| Note: the use of ECG monitoring |
| 2016-07-04 |
|
1. Remove ECG cable and the lead wire plug convex aligned the groove of the host front panel "ECG" Jack, can be inserted
2 ECG cable with 5 electrode head and the other end of the measured body are connected, the correct connection step:
A. five specific position on the body of the electrode patch of sand rub, then 75\% ethanol for the position measurement of surface cleaning. To remove human skin stratum corneum and perspiration, to prevent the electrode from poor contact.
B. will be connected to the electrode head of the heart and the 5 electrodes.
C. ethanol volatile clean, the 5 electrode piece to the specific position after cleaning to make it contact with reliable, not to fall off.
D. will lead the line clip in fixed bed skirt. And told the patient and health care workers do not pull the wire and lead wire.
3, please be sure to connect a good ground, which will play a very important role in the normal waveform display.
|
 |
|
Msn | 
Yahoo | 
Skype | 
Gmail talk 
