| Note the use of BiPAP ventilator |
| 2016-05-23 |
|
1, ventilator after boot should first set good treatment parameters and then connected to the patient.
2, machine use should choose appropriate nasal mask and patient connection. Air leakage mask should be part of the 60LPM
3, to check the leak ventilator when joint is intact, whether the leak was blocked. If the leak is accidentally blocked will cause the patient's carbon dioxide repeated inhalation, the patient may have the risk of suffocation.
4, moving and handling ventilator humidification should be removed or wet water cans down the net.
5, storage machines should check whether there is water outlet, if found to have large amounts of water into the machine should be timely repair.
6, gray weekly cleaning membrane, white membrane superfine monthly replacement can effectively increase the service life of the machine.
7, to avoid cross infection, when the machine is used for infectious patients must use a bacterial filter. When used in the common patient, the bacterial filter can effectively prevent the bidirectional transmission of germs and viruses.
8, when the ventilator internal need disinfection is recommended to use gamma ray irradiation disinfection disinfection machine.
9, when the ventilator fault, and the fault code should stop using the machine, and maintenance personnel.
|
 |
|
Msn | 
Yahoo | 
Skype | 
Gmail talk 
