★ 1. Eccentric bed column design: The maximum unobstructed X-ray transmission area on the bed surface is ≥ 1500mm, providing the most convenient conditions for intraoperative use of C-arm or intraoperative imaging, ensuring that there is no obstruction in the neck, chest, abdomen, and legs for imaging.

★ 2. Control system: composed of two sets of control circuits A and B, and two sets of controllers. Set A is for normal use and set B is for backup.

★ 3. Movable bed board: It consists of six parts: head board, upper back

board, lower back board, hip board, split leg board and thigh board.

The head board is detachable, facilitating the installation of Neurosurgery head rest. The leg plate is detachable and foldable, making it easy to install suspended orthopedic traction frames, obstetrics and gynecology, and urology flushing equipment. The leg board can be extended in parallel, making it easy for doctors to stand. The bed board can pass through X-rays, and there is a film box guide under the bed board that can be inserted into the X-ray box. The front leg board can be swapped in a plug-in style.

★4. In the sitting Surgical positions, the height from the lowest end to the ground should be ≤ 750mm to meet the surgical requirements of head, neck, shoulder, etc

★ 5. Stability: Adopting the patented three section lifting column technology , the operating table has no exposed casters and excellent mobility and steering. The electric hydraulic control casters lock and release, and the central locking mechanism ensures the stability of the operating table

★6. Position adjustment method: Fully imported electric hydraulic surgical table design, the following positions are adjusted by electric hydraulic pressure and have corresponding one button function keys on the controller: bed surface lifting, head and foot tilt, left and right tilt, back plate tilt, standard one button horizontal reset, one button FLEX Position and one button RE-FLEX Position positions, automatically locked, electrically braked, and unlocked in 30 seconds.

★ 7.. The operating table adopts a box type connection device.

★ 8. The head plate connector uses a hoop type adjustment locking device

★ 9.. The longest part of the separated T-shaped base device is ≥ 1120mm, the widest part is ≥ 625mm, and the narrowest part is 410mm

10. Electric control system:

①Equipped with two independent electronic control operating systems (wired control and surgical bed backup operation motherboard)

②The controller is designed as a fully functional touch type with a one click "0" function

11. Material:

①The entire bed, base, and accessories are made of stainless steel material, which is durable and ensures no dead corners, making it easy to clean

②Mattress: It is made of special foam sponge core with a thickness of ≥ 60mm. It can be naturally reshaped according to the patient's temperature

and body shape to avoid the patient's point stress and effectively prevent the formation of bedsores for patients undergoing long-term surgery.

It has characteristics such as X-ray transparency, static conductivity, no liquid leakage, and can be disassembled

12. Integrated foot board: electrically adjustable, interchangeable front leg board.

13. The operating table comes standard with a battery.

14. The operating table is equipped with an emergency brake switch, which is convenient for medical personnel to flexibly push and deliver.

15. Overall technical parameters of the operating table:

(1) Table height adjustment range: low position ≤ 750mm, height adjustment range ≥ 300mm

(2) Bed surface length: ≥ 2050mm

(3) Bed width: ≥ 500mm

(4) Head tilt and foot tilt: ≥ 20 °

(5) Left tilt, right tilt: ≥ 18 °

(6) Standard headboard folding up/down: ≥ 45 °/60 °

(7) Maximum bearing weight: ≥ 270kg

16.Standard configuration: